When installing the tap, is the winding direction of the raw tape clockwise or counterclockwise?

Addtime:2021-02-03

1. The raw material belt needs to be wound along the thread direction, which greatly reduces the sealing performance.

2. Do not wrap all the threads with raw tape, which will not only prevent the raw tape from entering the pipeline, but also reduce the sealing performance. It is suggested to start winding from the second thread at the beginning of the thread to leave one thread out.

3. When winding the raw material belt, you need to use a little force to ensure that the raw material belt will not be broken. Only in this way can the raw material belt be tight enough to ensure the tightness. After the raw material belt is wrapped, once it is tightened, it is not allowed to unwind the wire (screw back), otherwise it needs to be rewound.